|
IC-PT2613 Datasheet, PDF (2/10 Pages) IC-Haus GmbH – 6-CH. PHASED ARRAY OPTO ENCODER (26-1250) | |||
|
◁ |
iC-PT 2613
preliminary
6-CH. PHASED ARRAY OPTO ENCODER (26-1250)
Rev A3, Page 2/10
DESCRIPTION
iC-PT 2613 is an optical sensor IC with integrated
photosensors whose signals are converted into volt-
ages by low-noise transimpedance ampliï¬ers. Pre-
cise voltage comparators with hysteresis are used to
generate the digital signals, supplied to the output
pins via differential +/- 4 mA push-pull drivers.
The built-in LED power control with its 40 mA driver
stage permits a direct connection of the encoder
LED. Regardless of aging or changes in temperature
the received optical power is kept constant. An exter-
nal resistor presets the photocurrent operating point
and thus the desired illumination level.
Selection input SEL chooses for three different op-
erating modes: regular A/B operation, A/B operation
with 2-fold interpolation, or analog operation. With
analog operation the ampliï¬ed signal voltages are
available at the outputs for inspection and monitoring
encoder assembly.
Typical applications of iC-PT devices are incremental
encoders for motor feedback and commutation. To
this end, device version iC-PT 2613 provides differ-
ential A/B tracks and a differential index track, each
consisting of multiple photo sensors. The layout of
the signal ampliï¬ers is such that there is an excellent
paired channel matching, eliminating the needs for
signal calibration in most cases.
Additionally, three more tracks are provided to gener-
ate motor commutation information for the U, V and
W outputs, for instance with 90 degree phase shift to
operate 4-phase brushless motors (period count and
phase shift can be varied by the code disc applied).
|
▷ |