IC-LFL1402_17 Datasheet, PDF (2/9 Pages) IC-Haus GmbH – 256x1 LINEAR IMAGE SENSOR

iC-LFL1402
256x1 LINEAR IMAGE SENSOR
Rev A5, Page 2/9
DESCRIPTION
iC-LFL1402 is an integrating light-to-voltage converter
with a single line of 256 pixels pitched at 63.5 µm (cen-
ter-to-center distance). Due to the monolithical inte-
gration there is no pixel-gap or pitch distortion what-
soever. Each pixel consists of a 56.4 µm x 200 µm
photodiode, an integration capacitor and a sample
and hold circuit.
The integrated control logic makes operation very sim-
ple, with only a start and clock signal necessary. A
third control input enables the integration period to be
prematurely terminated at any time (electronic shut-
ter).
When the start signal is given the hold mode is acti-
vated for all pixels simultaneously with the next rising
clock edge; starting with pixel 1 the hold voltages are
switched in sequence to the push-pull output ampli-
fier. The second clock pulse deletes all integration
capacitors and the integration period starts again in
the background during the output phase. A run is
complete after 256 clock pulses.
iC-LFL1402 is suitable for high clock rates of up to
5 MHz.
PACKAGING INFORMATION OBGA™ LFL1C
PIN CONFIGURATION OBGA™ LFL1C
PIN FUNCTIONS
No. Name Function
1 SI Start Integration Input
2 CLK Clock Input
3 AO Analogue Output
4 VCC +5 V Supply Voltage
5 RSET Connect to GND for internal bias
6 AGND Analogue Ground
7 GND Digital Ground
8 DIS Disable Integration Input
CHIP-LAYOUT
iC-LFL1402
Chip size: 16.6 mm x 1.7 mm
DIS
PIXEL 1
SI
GND
CLK
Pitch 63.5 um
Active Area 56.4 um x 200 um
AGND
AO
TP RSET
PIXEL 256
VDD VCC