IC-HC Datasheet, PDF (2/10 Pages) IC-Haus GmbH – ULTRA FAST DUAL HV-KOMPARATOR

iC-HC
ULTRA FAST DUAL HV-KOMPARATOR
preliminary
Rev A1, Page 2/10
DESCRIPTION
iC-HC features separate supply voltages for both the
analogue inputs and the logic outputs. The logic
power supply though must stay inside the boundaries
of the inputs power supply.
The iC also features a zero current consumption
standby mode as well as a current saving mode,
the latter reducing the current consumption by 80%,
though tripling the propagation delay.
Four values of input hysteresis (17 to 100 mV) or al-
ternatively a hold function can be configured. The
hold function blocks the toggling of the output for the
configured hold time. For hold times > 100 µs exter-
nal R/C networks can be used. Both hysteresis and
hold function can be deactivated.
PACKAGING INFORMATION TSSOP16 to JEDEC
PIN CONFIGURATION TSSOP16
IN0 1
-
IP0 2
+
VP 3
T0 4
T1 5
VN 6
IP1 7
+
IN1 8
-
HYS
HOLD
Slow Fast
16 O0
15 NFAST
14 VDD
13 P0
12 P1
11 GND
10 NEN
9 O1
PIN FUNCTIONS
No. Name Function
1 IN0 Neg. Input Comparator 0
2 IP0 Pos. Input Comparator 0
3 VP Pos. Power Supply
4 T0
Configuration Input / ext. RC
5 T1
Configuration input / ext. RC
6 VN Neg. Power Supply
7 IP1 Pos. Input Comparator 1
8 IN1 Neg. Input Comparator 1
9 O1 Output Comparator 1
10 NEN Standby (NEN = hi)
11 GND Logic Ground
12 P1 Configuration Input
13 P0 Configuration Input
14 VDD Logic Power Supply 5/3.3 V
15 NFAST Power Save (NFAST = hi)
16 O0 Output Comparator 0