IC-DXC_11 Datasheet, PDF (2/11 Pages) IC-Haus GmbH – DIGITAL SENSOR I/O DRIVER

iC-DXC
DIGITAL SENSOR I/O DRIVER
preliminary
Rev A0.8, Page 2/11
DESCRIPTION
The iC-DXC is a simple I/O circuit capable of driving
ohmic, inductive and capacitive loads and features
integrated reverse polarity protection.
Forcing the output pin OUT from his current state is
signaled at pin MON. This can be used to implement
an IO-Link Wake-Up detection.
The output current is at least 200 mA from a supply Output transitions are slew-rate limited to reduce in-
voltage of 8 to 30 V.
terference.
With input OE = high the output works as a push-pull
driver controlled by pin NIN. If pin NIN is set either to
low or high, the output acts as a high-side (PNP) or
low-side (NPN) driver respectively, controlled by the
input OE.
The output is current limited to 450 mA and short cir-
cuit proof by shutting down the driver with excessive
temperature.
A regulated 5 V low power supply is available at pin
VOUT to supply external circuitry with up to 10 mA.
PACKAGES DFN8 3x3
PIN CONFIGURATION
8765
Backside
Pad/Shield
(BP)
1 234
PIN FUNCTIONS
No. Name Function
1 VOUT Regulated +5 V Voltage
2 MON Monitor Output
3 GND Ground
4 NIN Input
5 OE Output Enabled
6 CFO Feedback Channel Output
7 OUT Driver Output
8 VB Supply Voltage