IC-DP_16 Datasheet, PDF (2/10 Pages) IC-Haus GmbH – HIGHSIDE SWITCH

iC-DP
HIGHSIDE SWITCH
Rev D1, Page 2/10
DESCRIPTION
iC-DP is a monolithic highside switch for ohmic, induc-
tive and capacitive loads.
Designed for a wide input voltage range of 4 to 36 V,
it is capable of supplying a minimum output current
of 200 mA. The output acts as a current source with
a low saturation voltage; protection against short-cir-
cuiting is provided by the device shutting down with
excessive temperature. The chip is activated when
the input voltage threshold V(PI) − V(NI) of typically
3.5 V is exceeded.
When used as a 4-pin element, the input (PI, NI) and
output (DP, VP) reference voltages are decoupled.
The maximum permissive voltage difference between
VP and PI is 36 V.
PACKAGING INFORMATION
PIN CONFIGURATION
SOT23-6L (JEDEC), 1.6 mm
6 54
<P-CODE>
(<A-CODE> on Bottom Side)
PIN FUNCTIONS
No. Name Function
1 NI
2 PI
3 DP
4 VP
5 n.c.
6 n.c.
Negative Input
Positive Input
Output
Supply
(not connected)
(not connected)
1 23
dra_sot23-6l-1_pack_3a, 10:1
PIN CONFIGURATION
UDFN6-1.8x2
654
<P-CODE>
<A-CODE>
PIN FUNCTIONS
No. Name Function
1 PI
2 VP
3 n.c.
4 DP
5 n.c
6 NI
Positive Input
Supply
(not connected)
Output
(not connected)
Negative Input
1 23
dra_udfn6-18x20_pack_3a, 14:1