IC-DP Datasheet, PDF (2/7 Pages) IC-Haus GmbH – HIGHSIDE SWITCH

iC-DP
HIGHSIDE SWITCH
preliminary
Rev B1, Page 2/7
DESCRIPTION
iC-DP is a monolithic highside switch for ohmic, in- the input voltage threshold V(PI)-V(NI) of typically
ductive and capacitive loads.
3.5 V is exceeded.
Designed for a wide input voltage range of 4 to 36 V,
it is capable of supplying a minimum output current
of 200 mA. The output acts as a current source with
a low saturation voltage; protection against short-
circuiting is provided by the device shutting down with
excessive temperature. The chip is activated when
When used as a 4-pin element (with the SOT23-6L
package only), the input (PI, NI) and output (DP, VP)
reference voltages are decoupled. The maximum
permissive voltage difference between VP and PI is
36 V.
PACKAGES SOT23-6L (JEDEC)
PIN CONFIGURATION
SOT23-6L (JEDEC), 1.6 mm
(top view)
6
5
4
1
2
3
PIN FUNCTIONS
No. Name Function
1 NI
2 PI
3 DP
4 VP
5 n.c.
6 n.c.
Negative Input
Positive Input
Output
Supply
SOT223-4L, SC59-3L , DFN and CSP packages are available on request.