IC-NV Datasheet, PDF (11/19 Pages) IC-Haus GmbH – 6-BIT Sin/D FLASH CONVERTER

iC-NV
6-BIT Sin/D FLASH CONVERTER
Rev C1, Page 11/19
Test functions
Device iC-NV features internal test functions which can be used to ease sensor bridge calibration procedures if
such are required. To enable test operation, a threshold current of approx. 1mA present at pin RCLK must be
exceeded during power up. Subsequently, four different test modes are selectable starting with mode 3 set
initially.
Fig. 13: Activating test functions via pin RCLK.