English
Language : 

IC-MZ_11 Datasheet, PDF (1/11 Pages) IC-Haus GmbH – DIFFERENTIAL HALL SWITCH
iC-MZ
DIFFERENTIAL HALL SWITCH
FEATURES
o Dual Hall sensors set 2.0 mm apart
o Magnetic field frequency range from DC to 40 kHz
o Supply voltage range 4.5 to 36 V
o Complementary push-pull line driver outputs with integrated
line adaptation
o Output stages are current limited and short-circuit-proof due to
temperature shutdown
o Min. 200 mA output current at 24 V supply voltage
o Low driver stage saturation voltage (< 0.4 V at 30 mA)
o RS422-compatible (TIA / EIA standard)
o Temperature and supply voltage monitor with error messaging
o Amplified differential sensor signal, accessible for diagnostic
purposes
o Additional mode of operation (twofold line driver)
o Temperature range from -40°C to 125°C (Option: -55°C)
Rev A3, Page 1/11
APPLICATIONS
o Gear wheel sensing
o Pole wheel and magnetic tape
scanning
o Magnetic incremental encoders
o Proximity switches
o Two-channel line drivers up to
100 kHz
PACKAGES
BLOCK DIAGRAM
DFN10 4 mm x 4 mm
VPA
4.5 ... 36 V
VB
GND1
D
ND
A
NA
NERR
TEST
GND2
LINE
Copyright © 2011 iC-Haus
http://www.ichaus.com