IN08134 Datasheet, PDF (1/2 Pages) ice Components, Ins. – Isat is the current at which the inductance drops by 20% typical

Data Sheet
Mechanical Drawing
TOP VIEW
14.5 max
ICE Components, Inc.
Tel [phone] Fax [phone]
[e-mail]
www.icecomponents.com
1165 Allgood Rd., Ste. #20, Marietta, GA 30062
General Information
Customer
Part Number IN08134
Revision
1
Description
Inductor
Date
JUL-21-2009
Reference
--
Doc Control # --
Issue (For ICE use only) --
Specification
Item
Pins
Spec
0.3 +/- 0.1
0.5 max
2.0 +/- 0.25
Test Condition
Inductance
S–F
S–F
1.0 uH +/- 10% 500 kHz,1Vrms, series (0Adc)
0.75 uH min 500 kHz,1Vrms, series (34Adc)
DCR
S–F
2.9 mOhms typ.
3.5 mOhms max
25 deg C
Isat at +25degC S – F
34 Adc max
Isat at +100degC S – F
26 Adc max
Isat at +120degC S – F
24 Adc max
Idc
S–F
21 Adc max
BOTTOM VIEW
unit:mm
Sample Test Data
Schematic
S
F
Sample approval is required before
release to production. Sample
specifications take precedence over
customer specifications.
Recommend PCB Layout
Remark
1. Isat is the current at which the inductance drops
4.0
by 20% typical.
2. Idc is the current at which the temperature of the
part increases by 50 deg C.
3. Meets UL94V-0
3.5
4. This is RoHS compliant product.
5. The part should come in tape & reel on mass
production.
8.9
6.
7.
unit:mm 8.
Lead out flatness should be within 4 mils.
Lead outs should be tinned all sides.
Operating temperature range: -40degC to
+130degC.
9. Inductance vs. Current Curve, Temperature vs.
Current Curve and Temperature vs. DCR as
attached.
Rev.
Description
PRD CHK APP Date NTFY
1 Initial release
Emily Gary L. L. Chou 2009/7/21 2009/7/21
__________________________
Customer Signature
PAGE 1 OF 2