HY57V281620A Datasheet, PDF (6/13 Pages) Hynix Semiconductor – 4 Banks x 2M x 16bits Synchronous DRAM

DC CHARACTERISTICS II (TA=0 to 70°C, VDD=3.3±0.3V, VSS=0V)
HY57V281620A
Parameter
Symbol
Test Condition
Speed
Unit Note
-6
-7
-K -H -8 -P -S
Operating Current
IDD1
Burst length=1, One bank active
tRC ≥ tRC(min), IOL =0mA
120 120 110 110 100 100 100 mA 1
Precharge Standby Current ^IDD2P
in Power Down Mode
IDD2PS
CKE ≤ VIL(max), tCK = 15ns
CKE ≤ VIL(max), tCK = ∞
2
mA
2
CKE ≥ VIH(min), CS ≥ VIH(min), tCK = 15ns
IDD2N Input signals are changed one time during
20
Precharge Standby Current
2clks. All other pins ≥ VDD-0.2V or ≤ 0.2V
mA
in Non Power Down Mode
IDD2NS ^{CKE ≥ VIH(min), tCK = ∞}
10
Input signals are stable.
Active Standby Current
in Power Down Mode
IDD3P CKE ≤ VIL(max), tCK = 15ns
IDD3PS CKE ≤ VIL(max), tCK = ∞
7
mA
7
CKE ≥ VIH(min), CS ≥ VIH(min), tCK = 15ns
IDD3N Input signals are changed one time during
40
Active Standby Current
in Non Power Down Mode
2clks. All other pins ≥ VDD-0.2V or ≤ 0.2V
IDD3NS ^{CKE ≥ VIH(min), tCK = ∞}
Input signals are stable.
mA
40
Burst Mode Operating
Current
IDD4
tCK ≥ tCK(min), IOL=0mA
All banks active
CL=3
CL=2
140 130 120 120 110 100 100
mA 1
100 100 120 100 100 100 100
Auto Refresh Current
IDD5
tRRC ≥ tRRC(min), All banks active
240 240 240 220 200 200 200 mA 2
Self Refresh Current
IDD6
CKE ≤ 0.2V
2
mA 3
800
uA 4
Note :
1.IDD1 and IDD4 depend on output loading and cycle rates. Specified values are measured with the output open
2.Min. of tRRC (Refresh RAS cycle time) is shown at AC CHARACTERISTICS II
3.HY57V281620AT-6/7/K/H/8/P/S
4.HY57V281620ALT-6/7/K/H/8/P/S
Rev. 1.3/Aug. 01
7