SMCJ10_17 Datasheet, PDF (1/5 Pages) HY ELECTRONIC CORP. – SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL

SURFACE MOUNT
UNIDIRECTIONAL AND BIDIRECTIONAL _.
TRANSIENT VOLTAGE SUPPRESSORS
SMCJ SERIES
REVERSE VOLTAGE - 5.0 to 440 Volts
POWER DISSIPATION - 1500 Watts
FEATURES
● Rating to 200V VBR
● For surface mounted applications
● Reliable low cost construction utilizing molded plastic
technique
● Plastic material has UL recognition 94V-0
● Typical IR less than 1µA above 10V
● Fast response time:typically less than 1.0ns for
Uni-direction,less than 5.0ns fo Bi-direction,from 0 Volts
to BV min
MECHANICAL DATA
● Case : Molded Plastic
● Polarity:by cathode band denotes uni-directional device
none cathode band denotes bi-directional device
● Weight : 0.007 ounces, 0.21 grams
SMC
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Peak pulse power dissipation with a 10/1000μs waveform
Peak pulse current with a waveform
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Typical thermal resistance, junction to ambient (Note1)
Typical thermal resistance, junction to lead(Note1)
Operating Temperature Range
Storage Temperature Range
SYMBOL
P_PPM
I_PPM
IFSM
R_θJA
R_θJL
TJ
TSTG
NOTES:1. Mounted on P.C.B. with 0.32 x 0.32” (8.0 x 8.0mm) copper pad areas.
2.The typical data above is for reference only(典型值仅供参考).
VALUE
1500
See Next Table
200
75.0
15
-55 to + 150
-55 to + 150
UNIT
W
A
A
℃/W
℃/W
℃
℃
Rev. 8, 24-Apr-2017