SMBJ Datasheet, PDF (1/4 Pages) Jinan Gude Electronic Device – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SURFACE MOUNT
UNIDIRECTIONAL AND BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSORS
.
SMBJ SERIES
REVERSE VOLTAGE - 5.0 to 170 Volts
POWER DISSIPATION - 600 Watts
FEATURES
● Rating to 200V VBR
● For surface mounted applications
● Reliable low cost construction utilizing molded plastic
technique
● Plastic material has UL recognition 94V-0
● Typical IR less than 1µA above 10V
● Fast response time:typically less than 1.0ns for
Uni-direction,less than 5.0ns fo Bi-direction,from 0 Volts
to BV min
MECHANICAL DATA
● Case : Molded Plastic
● Polarity:by cathode band denotes uni-directional device
none cathode band denotes bi-directional device
● Weight : 0.003 ounces, 0.093 grams
SMB
.083(2.11)
.075(1.91)
.185(4.70)
.160(4.06)
.096(2.44)
.084(2.13)
.060(1.52)
.030(0.76)
.220(5.59)
.200(5.08)
.155(3.94)
.130(3.30)
.012(.305)
.006(.152)
.008(.203)
.002(.051)
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Peak Power Dissipation at T_A=25℃
TP=1ms (NOTE1,2)
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Steady State Power Dissipation at TL=75℃
Maximum Instantaneous Forward Voltage
at 50A for Unidirectional Devices Only (NOTE3)
Operating Temperature Range
Storage Temperature Range
SYMBOL
P_PK
IFSM
PM(AV)
VF
TJ
TSTG
VALUE
Minimum 600
100
5.0
SEE NOTE4
-55 to + 150
-55 to + 175
NOTES:1. Non-repetitive current pulse ,per Fig. 3 and derated above TA=25℃ per Fig. 1.
2. Thermal Resistance junction to Lead.
3. 8.3ms single half-wave duty cycle=4 pulses per minutes maximum (uni-directional units only).
4. VF=3.5V on SMBJ5.0 thru SMBJ90A devices and VF=5.0V on SMBJ100 thru SMBJ170A devices.
UNIT
W ATTS
AMPS
W ATTS
VOLTS
℃
℃
~ 284 ~