SMAJ10C_17 Datasheet, PDF (1/5 Pages) HY ELECTRONIC CORP. – SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE

SMAJ SERIES
SURFACE MOUNT UNIDIRECTIONAL AND
BIDIRECTIONAL TRANSIENT VOLTAGE _.
SUPPRESSORS
REVERSE VOLTAGE - 5.0 to 170 Volts
POWER DISSIPATION - 400 Watts
FEATURES
● Rating to 200V VBR
● For surface mounted applications
● Reliable low cost construction utilizing molded plastic
technique
● Plastic material has UL recognition 94V-0
● Typical IR less than 1µA above 10V
● Fast response time:typically less than 1.0ns for
Uni-direction,less than 5.0ns fo Bi-direction,from 0 Volts
to BV min
.065(1.65)
.049(1.25)
SMA
.181(4.60)
.157(4.00)
.114(2.90)
.093(2.35)
MECHANICAL DATA
● Case : Molded Plastic
● Polarity:by cathode band denotes uni-directional device
none cathode band denotes bi-directional device
● Weight : 0.002 ounces, 0.053 grams
.103(2.62)
.079(2.00)
.060(1.52)
.030(0.76)
.208(5.28)
.188(4.80)
.008(.203)
.002(.051)
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Peak Power Dissipation at T_A=25℃
TP=1ms (NOTE1,2)
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Steady State Power Dissipation at TL=75℃
Maximum Instantaneous Forward Voltage
at 35A for Unidirectional Devices Only (NOTE3)
Operating Temperature Range
Storage Temperature Range
SYMBOL
P_PK
IFSM
PM(AV)
VF
TJ
TSTG
VALUE
Minimum 400
40
1.0
3.5
-55 to + 150
-55 to + 175
NOTES:1. Non-repetitive current pulse ,per Fig. 3 and derated above TA=25℃ per Fig. 1.
2. Thermal Resistance junction to Lead.
3. 8.3ms single half-wave duty cycle=4 pulses per minutes maximum (uni-directional units only).
UNIT
WATTS
AMPS
WATTS
VOLTS
℃
℃
Rev. 7, 16-Mar-2017