MB05MA Datasheet, PDF (1/3 Pages) DIYI Electronic Technology Co., Ltd. – SINGLE PHASE 1.0AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

GLASS PASSIVATED
BRIDGE RECTIFIERS
FEATURES
●Rating to 1000V PRV
●Ideal for printed circuit board
●Reliable low cost construction utilizing
molded plastic technique results in inexpensive product
●Lead tin plated copper
MECHANICAL DATA
●Polarity:Symbol molded on body
●Weight: 0.0044 ounces,0.125 grams
●Mounting position :Any
MB05MA thru MB10MA
REVERSE VOLTAGE - 50 to 1000 Volts
FORWARD CURRENT - 0.8 Ampere
MBM-A
.032(0.8)
.020(0.5)
.051(1.3)
.035(0.9)
.106(2.7)
.090(2.3)
.195(4.95)
.177(4.50)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current (Note 1)
@TA=40 ℃
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 0.8A DC
Maximum DC Reverse Current
@TJ=25℃
at Rated DC Bolcking Voltage
@TJ=125℃
Typical Junction Capacitance Per Element (Note2)
Typical Thermal Resistance (Note3)
Operating Temperature Range
Storage Temperature Range
SYMBOL MB05MA MB1MA MB2MA MB4MA MB6MA MB8MA MB10MA
VRRM
50
VRMS
35
VDC
50
100
200
400
600
800
1000
70
140
280
420
560
700
100
200
400
600
800
1000
I(AV)
0.8
IFSM
VF
IR
CJ
RθJC
TJ
TSTG
30
1.1
5.0
500
15
75
-55 to +150
-55 to +150
NOTES:1.Mounted on P.C. board.
2.Measured at1.0MHz and applied reverse voltage of 4.0V DC.
3.Thermal resistance junction to case.
4.The typical data above is for reference only(典型值仅供参考).
UNIT
V
V
V
A
A
V
μA
pF
℃/W
℃
℃
Rev. 2, 16-Mar-2017