GBU2006L Datasheet, PDF (1/2 Pages) HY ELECTRONIC CORP. – Ideal for printed circuit board

GLASS PASSIVATED
BRIDGE RECTIFIERS
FEATURES
●Surge overload rating -260 amperes peak
●Ideal for printed circuit board
●Reliable low cost construction utilizing
molded plastic technique
●Plastic material has U/L
flammability classification 94V-0
●Mounting postition:Any
GBU2006L
REVERSE VOLTAGE - 600 Volts
FORWARD CURRENT - 20 Amperes
GBU
.437(11.1)
.430(10.9)
.874(22.2)
.860(21.8)
.126(3.2)*45°
CHAMFER
.139(3.53)
.133(3.37)
.752(19.1)
.720(18.3)
.073(1.85)
.057(1.45)
.161(4.1)
.134(3.4)
.232(5.9)
.213(5.4)
.401(10.2)
.392(9.80)
.720(18.29)
.680(17.27)
.047(1.2)
.035(0.9)
.100(2.54)
.085(2.16)
.106(2.7)
.080(2.03) ^.091(2.3)
.065(1.65)
.210 .210 .210
.190 .190 .190
(5.3) (5.3) (5.3)
(4.8) (4.8) (4.8)
.022(.56)
.018(.46)
Dimensions in inches and (milimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
SYMBOL
GBU2006L
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward (with heatsink Note1)
Rectified Current @ TC=100℃ (without heatsink)
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
I²t Rating for Fusing (t<8.3ms)
Typical Junction Capacitance Per Element (Note2)
Maximum Forward Voltage at 10.0A DC
Maximum DC Reverse Current
at Rated DC Blocking Voltage
@ TJ=25℃
@ TJ=125℃
Typical Thermal Resistance
Operating Temperature Range
Storage Temperature Range
VRRM
VRMS
VDC
I(AV)
IFSM
I²t
CJ
VF
IR
RθJC
TJ
TSTG
600
420
600
20.0
3.6
260
280
70
127
10.0
500
2.2
-55 to +150
-55 to +150
NOTES: 1.Device mounted on 100mm*100mm*1.6mm cu plate heatsink.
2.Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3.The typical data above is for reference only(典型值仅供参考).
UNIT
V
V
V
A
A
A²s
pF
V
μA
℃/W
℃
℃
REV. 2, 18-Aug-2015