BR6G Datasheet, PDF (1/2 Pages) HY ELECTRONIC CORP. – GLASS PASSIVATED BRIDGE RECTIFIERS

GLASS PASSIVATED
BRIDGE RECTIFIERS
FEATURES
● Surge overload rating -150 amperes peak
● Low forward voltage drop
● Small size; simple installation
● Sliver plated copper leads
● Mounting position: Any
BR6G SERIES
REVERSE VOLTAGE - 50 to 1000Volts
FORWARD CURRENT - 6.0 Amperes
BR6
.276(7.0)
.236(6.0)
.042(1.07)
.038(0.97)DIA.
.750
(19.0)
MIN
.620(15.7)
.580(14.7)
HOLE FOR
NO.6 SCREW
.445(11.3)
.405(10.3)
.620(15.7)
.580(14.7)
.445(11.3)
.405(10.3)
Polarity shown on side of case, Positive lead by beveled corner.
Dimensions in inches and (milimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
SYMBOL BR6005G BR601G BR602G BR604G BR606G BR608G BR610G UNIT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge Input Voltage
Maximum Average Forward
Rectified Output Current at
Tc=100℃ (Note1)
TA=50℃ (Note2)
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load
Maximum Forward Voltage Drop
Per Bridge Element at 3.0A Peak
Maximum Reverse Current at Rated TA=25℃
DC Blocking Voltage Per Element TA=100℃
Operating Temperature Range
VRRM
50
VRMS
30
I(AV)
IFSM
VF
IR
TJ
100
200
400
600
800
1000
V
70
140
280
420
560
700
V
6.0
A
3.0
150
A
1.1
V
10.0
uA
1.0
mA
-55 to +150
℃
Storage Temperature Range
TSTG
-55 to +150
℃
Notes:1.Unit mounted on metal chassis
2. Unit mounted on P.C. board
~ 375 ~