B05SA Datasheet, PDF (1/3 Pages) HY ELECTRONIC CORP. – SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS

SURFACE MOUNT GLASS PASSIVATED
BRIDGE RECTIFIERS
FEATURES
●Rating to 1000V PRV
●Ideal for printed circuit board
●Reliable low cost construction utilizing
molded plastic technique results in inexpensive product
●Lead tin plated copper
B05SA thru B10SA
REVERSE VOLTAGE - 50 to 1000 Volts
FORWARD CURRENT - 0.8 Ampere
MBS-
倒角0.5*45°
.067(1.7)
.051(1.3)
MECHANICAL DATA
●Polarity:Symbol molded on body
●Weight: 0.0044 ounces,0.125 grams
●Mounting position :Any
.032(0.8)
.020(0.5) _.014(0.35)
.051(1.3) ^.006(0.15)
.035(0.9)
.043(1.1)
.028(0.7)
.106(2.7)
.090(2.3)
.195(4.95)
.177(4.50)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current (Note 1)
@TA=40 ℃
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 0.8A DC
Maximum DC Reverse Current
@TJ=25℃
at Rated DC Bolcking Voltage
@TJ=125℃
Typical Junction Capacitance Per Element (Note2)
Typical Thermal Resistance (Note3)
Operating Temperature Range
Storage Temperature Range
SYMBOL B05SA
VRRM
50
VRMS
35
VDC
50
I(AV)
IFSM
VF
IR
CJ
RθJC
TJ
TSTG
NOTES:1.Mounted on P.C. board.
2.Measured at1.0MHz and applied reverse voltage of 4.0V DC.
3.Thermal resistance junction to case
4.The typical data above is for reference only(典型值仅供参考).
B1SA
100
70
100
B2SA
200
140
200
B4SA
400
280
400
0.8
B6SA
600
420
600
30
1.1
5.0
500
15
75
-55 to +150
-55 to +150
B8SA
800
560
800
B10SA
1000
700
1000
UNIT
V
V
V
A
A
V
μA
pF
℃/W
℃
℃
Rev. 2, 16-Mar-2017