10SQ040_17 Datasheet, PDF (1/3 Pages) HY ELECTRONIC CORP. – PHOTOVOLTAIC SOLAR CELL PROTECTION SCHOTTKY RECTIFIER

PHOTOVOLTAIC SOLAR CELL
PROTECTION SCHOTTKY RECTIFIER
FEATURES
●Metal of silicon rectifier , majority carrier conduction
●Guard ring for transient protection
●Low power loss,high efficiency
●High current capability,low VF
●High surge capacity
●For use in low voltage,high frequency inverters,free
wheeling,and polarity protection applications
10SQ040 thru 10SQ100
REVERSE VOLTAGE - 40 to 100Volts
FORWARD CURRENT - 12.5 Amperes
R-6
TC measurement point
壳温量测点
MECHANICAL DATA
●Case: JEDEC R-6 molded plastic
●Polarity: Color band denotes cathode
●Weight: 0.07 ounces , 2.1 grams
●Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Maximum Recurrent Peak Reverse Voltage
SYMBOL
VRRM
10SQ040 10SQ045 10SQ050 10SQ060 10SQ080 10SQ100 UNIT
40
45
50
60
80
100
V
Maximum RMS Voltage
VRMS
28
31.5
35
42
56
70
V
Maximum DC Blocking Voltage
Maximum Average Forward
Rectified Current
@Tc=95 ℃
Peak Forward Surge Current 8.3ms single half
sine-wave super imposed on rated load(JEDEC
Method)
Peak Forward Voltage at 12.5A DC(Note1)
Maximum DC Reverse Current @Tj=25℃
at Rated DC Bolcking Voltage @Tj=100℃
Tyical Junction Capacitance (Note2)
Tyical Thermal Resistance (Note3)
Operating Temperature Range
Storage Temperature Range
VDC
I(AV)
IFSM
VF
IR
CJ
RθJC
TJ
TSTG
40
45
0.55
50
60
12.5
275
0.7
0.5
50
450
3.0
-55 to+200
-55 to+200
80
100
V
A
A
0.8
V
mA
pF
℃/w
℃
℃
NOTES:1.300us Pulse Width, 2%Duty Cycle.
2.Measured at 1.0 MHZ and applied reverse voltage of 4.0VDC.
3.Thermal Resistance Junction to case.
4.The typical data above is for reference only(典型值仅供参考).
Rev. 7, 16-Mar-2017