1-5KE10_17 Datasheet, PDF (1/5 Pages) HY ELECTRONIC CORP. – UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS

UNIDIRECTIONAL AND BIDIRECTIONAL
TRANSIENT VOLTAGE SUPPRESSORS .
FEATURES
● Low leakage
● Uni and bidirectional unit
● Excellent clamping capability
● Plastic material has UL recognition 94V-0
● Fast response time
1.5KE SERIES
REVERSE VOLTAGE - 6.8 to 400 Volts
POWER DISSIPATION - 1500 Watts
DO-201
1.0(25.4)
MIN
..004328((10..0966))DIA.
.375(9.5)
.335(8.5)
MECHANICAL DATA
●Case : Molded Plastic
●Marking : Unidirectional -type number and cathode band
Bidirectional-type number only
●Weight :1.2 grams
1.0(25.4)
MIN
.220(5.6)
.197(5.0)
DIA.
Dimensions in inches and(millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS
Peak Power Dissipation at T_A=25℃
TP=1ms (NOTE1)
Peak Forward Surge Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load (JEDEC Method)
Steady State Power Dissipation at TL=75℃
Lead Lengths 0.375"(9.5mm),See Fig. 4
Maximum Instantaneous Forward Voltage
at 50A for Unidirectional Devices Only (NOTE2)
Operating Temperature Range
Storage Temperature Range
SYMBOL
P_PK
IFSM
PM(AV)
VF
TJ
TSTG
VALUE
Minimum 1500
200
5.0
See NOTE 3
-55 to + 150
-55 to + 175
NOTES:1. Non-repetitive current pulse ,per Fig. 5 and derated above TA=25℃ per Fig. 1 .
2. 8.3ms single half-wave duty cycle=4 pulses per minutes maximum (uni-directional units only).
3. VF=3.5V on 1.5KE6.8 thru 1.5KE200A devices and VF=5.0V on 1.5KE1100 thru 1.5KE400A devices.
UNIT
WATTS
AMPS
WATTS
VOLTS
℃
℃
Rev. 7, 16-Mar-2017