HWS436 Datasheet, PDF (3/3 Pages) Hexawave, Inc – GaAs DC-6 GHz DPDT Switch

Absolute Maximum Ratings
Parameter
RF Input Power
Control Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
+32 dBm @ +3V
+6V
-40°C to +85°C
-65°C to +150°C
Pin Out (Top View)
HWS436
GaAs DC-6 GHz DPDT Switch
September 2006 V2
Logic Table for Switch On-Path
VC1
VC2
VC3
VC4 On-Path
0
1
0
1
ANT1-RX
0
1
1
0
ANT1-TX
1
0
0
1
ANT2-RX
1
0
1
0
ANT2-TX
Note:
1. ‘1’ = +3V to +5V, ‘0’ = 0V to +0.2V
2. VC1 and VC2 are used for antenna selection, while
VC3 and VC4 are used for TX/RX selection.
12 11 10
VC4
1
GND 2
VC1
3
9
VC3
8 GND
7
VC2
456
Note:
1. DC blocking capacitors C_B=8pF are required on all
RF ports.
2. Exposed pad in the bottom must be connected to
ground by via holes.
3. TX and RX ports can be used interchangeably.
Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL [phone] FAX [phone]
http://www.hw.com.tw All specifications are subject to change without notice.