HE300 Datasheet, PDF (2/2 Pages) High Voltage Power Solutions, Inc. – SECONDARY SURGE "LIGHTNING" ARRESTER

ELECTRICAL CHARACTERISTICS
PART
NUMBER
SERVICE
VOLTAGE
AC
PHASE
WIRE
CONFIGURATION
HE300
120V
175V Max
(rms)
SINGLE
Line (Black)
Neutral/Ground (White)
HE300
TYPICAL CLAMP VOLTAGE
8 X 20uS Current Wave (Line to Ground)
1.5kA
500V(1)
625V⁽²⁾
5kA
650V⁽¹⁾
950V⁽²⁾
10kA
750V⁽¹⁾
1400V⁽²⁾
20kA
950V⁽¹⁾
2200V⁽²⁾
25kA
1050V⁽¹⁾
2600V⁽²⁾
(1) _{1" leads} (2) _{18" leads}
DIMENSIONS AND WIRING DIAGRAMS
ARCHITECT and ENGINEERS
SUGGESTED SPECIFICATIONS
The single phase, two wire Secondary Surge Arrester for
120 volt AC service or machine equipment shall be a
High Voltage Power Solutions Model HE300. The
lightning arrester shall be of a single MOV per pole
design and provide protection for Category C Transient
Surges as defined in ANSI C62.41 (Formerly IEEE Std.
587-1980) without degradation of the components. The
surge protector shall protect between the line and
neutral/ground conductor. The enclosure shall be
molded of fire retardant plastic. The unit will be sealed
with a UL component recognized epoxy potting
compound to minimize moisture and pollution intrusion.
A one-half inch conduit nipple and metal lock nut shall
be provided. 18 inch, stranded 12 gauge color coded
leads shall be provided. The arrester shall carry a one
year warrantee.
HIGH VOLTAGE POWER SOLUTIONS, INC. reserves the right to make changes in
these specifications at any time and without notice in order to supply the best product
possible.
¤ 2002 x HIGH VOLTAGE POWER SYSTEMS, INC. x Printed in U.S.A.
SPECIFICATIONS and STANDARDS
TECHNOLOGY: Metal Oxide Varistors (MOV) each
line to neutral/ground.
PEAK SURGE CURRENT: (8x20uS) 25,000 Amps
M C O V: 175 VAC rms (Line to Neutral).
ENCLOSURE: Black molded flame retardant plastic
housing with 1/2" x 20 threaded nipple. The
housing is weatherproof and UV resistant.
ENCAPSULATION: UL component recognized epoxy
potting material.
WIRING: Two12 gauge stranded color coded leads.
Black for line.
White for neutral/ground.
OPERATION TEMPERATURE: -40qC to +85qC
RESPONSE TIME: <5ns
CURRENT DRAIN: <100uA
UNIT WEIGHT: 7.5 ounces
SHIPPING WEIGHT: per arrester 8.5 ounces
per carton (12) 6.75 lbs.
per case (48) 28.5 lbs
ANSI : C62.11-1987 (Formerly IEEE Std. 587-1980)
PO Box 700968 Ɣ Dallas TX 75370
Ph [phone] Ɣ Fax [phone]