ACN2234L25 Datasheet, PDF (1/2 Pages) High Voltage Power Solutions, Inc. – HIGH VOLTAGE POWER SUPPLIES

2234 Series
HIGH VOLTAGE POWER SUPPLIES
FEATURES
y Non-Metallic Case
y Cost Effective
y Reliable Solid State Design
y High Efficiency
y Maintenance Free
y Automatic Over Current Shutdown and Recovery
y High Frequency Switch-mode Design
y UL Recognized Versions Available
y RoHS Versions Available
y Formerly CS2234 Series
TYPICAL APPLICATIONS
y Electrostatic Air Cleaners
y Electrostatic Packaging and Sealing
DESCRIPTION
The 2234 series of unregulated solid state switching
power supplies is designed for applications requiring
a medium duty High Voltage power supply. Input
voltage: 120 VAC (±10%) 50/60 Hz. Connection for
"HV On" indicating LED provided via ¼” terminal.
The 2234 series is packaged in a nonmetallic
enclosure and may be installed in any position.
Consult factory for additional information.
NOTICE: This power supply requires adequate
ground connection for operation. Failure to
provide ground could result in failure of the
power supply. Proper ground connections must
be made to input terminal on non-metallic case.
TYPICAL ELECTRICAL
SPECIFICATIONS
y Input Voltage: 120 VAC (±10%) 50/60 Hz
y Output Voltage: 25 kVDC
y Output Current: 400 µA Typical
y Output Power: 10 W Max
y Output Regulation: See Typical V-I Curve
y Load: May be operated into any load
condition (capacitive, resistive or inductive) or
no load. Can withstand arcing and short
circuits.
y Isolated Output; High Voltage referenced to
Earth Ground
TYPICAL MECHANICAL
SPECIFICATIONS
y Case: Glass Filled Noryl, UL 94V-1 Rated
y Encapsulant: Filled Epoxy, UL 94V-0 Rated
y Input Voltage Termination: ¼" black insulated
terminals
y "HV On" Indicating Light Termination: ¼"
black insulated terminal
y High Voltage Wire: 22 AWG, 30 KVDC,
UL Style 3239, 105ºC
y Temperature Rating:
Operating 0º to +60ºC
Storage -40º to +85ºC
3227 Skylane Drive Carrollton, TX 75006 972-248-7691 www.hvpsi.com Rev.3
Specifications subject to change without prior notification