AK8160BV Datasheet, PDF (6/16 Pages) HuaXinAn Electronics CO.,LTD – Low Power & Low Jitter Clock Generator for PCI Express

[AK8160BV]
6. Absolute Maximum Ratings
Over operating free-air temperature range unless otherwise noted ⁽¹⁾
Items
Symbol
Ratings
Unit
Supply voltage
VDD
-0.3 to 4.6
V
Input voltage
Vin
VSS-0.3 to VDD+0.3
V
Input current (any pins except supplies)
I_IN
Storage temperature
Tstg
±10
mA
-65 to 150
C
Note
(1) Stress beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. These are stress ratings only. Functional operation of the device at these or any other
conditions beyond those indicated under “Recommended Operating Conditions” is not implied.
Exposure to absolute-maximum-rating conditions for extended periods may affect device reliability.
Electrical parameters are guaranteed only over the recommended operating temperature range.
ESD Sensitive Device ^{This device is manufactured on a CMOS process, therefore,}
generically susceptible to damage by excessive static voltage.
Failure to observe proper handling and installation procedures can cause damage. AKM
recommends that this device is handled with appropriate precautions.
7. Recommended Operating Conditions
Parameter
Symbol
Conditions
Min Typ Max Unit
Operating temperature
Supply voltage ⁽¹⁾
Ta
VDD Pin: VDD1 - 4
-40
105 C
3.0 3.3 3.6 V
Output Load Capacitance
Cpl Pin: REFOUT
25 pF
Note:
(1) Power to VDD1 – VDD4 requires to be supplied from a single source. A decoupling capacitor of
0.1μF for power supply line should be connected close to each VDD pin.
Draft-E-00
-6-
2014/03