AP1016AEN Datasheet, PDF (5/16 Pages) HuaXinAn Electronics CO.,LTD – Dual H-Bridge Motor Driver IC

[AP1016AEN]
6. Absolute Maximum Ratings
Parameter
Control supply voltage
Symbol Min
VC
-0.5
Max Unit
6.0 V
Comments
Motor supply voltage1
VM
-0.5
9.5 V
VC level terminal voltage
(IN1A, IN1B, IN2A and IN2B)
Vterm1 -0.5
VC V
VM level terminal voltage
(OUT1A, OUT1B, OUT2A, OUT2B and CL)
Vterm2
-0.5
VM V
VC+VM level terminal voltage
(CH, VG)
Vterm3 -0.5 15.5 V
Maximum output current
Iload1
-
1.0 A Ta=25C
Maximum output current
Iload2
0.7 A Ta=85C
Maximum output peak current
Iload3
1.4 A (Note 3)
Power dissipation
PD1
2.0 W (Note 4),Ta=25C
Power dissipation
PD2
1.0 W (Note 4),Ta=85C
Storage temperature
Tstg
-40
150 C
Note 2. All above voltage is defined to GND1/2=0V.
Note 3. Under 10ms in 200ms
Note 4. When the 2-layer (pattern rate: 150%) board is used. This is calculated by R_θJ = (60)C /W.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is guaranteed at these extremes.
3.0
2.5
2.0
RθJA=60C/W at 2-layer PCB
1.5
1.0
0.5
0.0
0
25
50
75 85 100 125 150 175
Ambient Temperature (C)
Figure 2. Maximum Power Dissipation
MS1589-E-00
-5-
2014/01