SMD1210 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – UL 1434 1st Edition CSA C22.2 No. 0 CSA TIL No. CA-3A

Electrical characteristics(25℃)
SMD1210 Series
Part Number
Ih
(A)
It
(A)
Vmax
(V)
Imax
(A)
Pd(W)
Trip
Current(A)
Trip Rmin R1max
Time(S) (Ω） (Ω)
JK-SMD1210-005 0.05 0.15 60 100 0.6
0.25
1.50 2.8
50
JK-SMD1210-010 0.10 0.30 60 100 0.6
0.50
0.60 0.8
15
JK-SMD1210-020 0.20 0.40 30 100 0.6
8.0
0.02 0.40
5
JK-SMD1210-035 0.35 0.75 30 100 0.6
8.0
0.20 0.20 1.3
JK-SMD1210-035-30V 0.35 0.75 16 100 0.6
8.0
0.20 0.20 1.3
JK-SMD1210-050 0.50 1.00 13.2 100 0.6
8.0
0.10 0.18 0.9
JK-SMD1210-075 0.75 1.50
6
100 0.6
8.0
0.10 0.07 0.4
JK-SMD1210-110 1.10 2.20
6
100 0.6
8.0
0.30 0.05 0.21
JK-SMD1210-110-12V 1.10 2.20 12 100 0.8
8.0
0.30 0.05 0.25
JK-SMD1210-150 1.50 3.00 6
100 0.8
8.0
0.50 0.03 0.21
JK-SMD1210-175 1.75 3.50
6
100 0.8
8.0
0.60 0.02 0.08
JK-SMD1210-200 2.00 4.00
6
100 0.8
8.0
·IH = Hold current: maximum current device will pass without tripping in 25℃ still air.
·IT = Trip current: minimum current at which the device will trip in 25℃ still air.
·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current.
·IMAX = Maximum fault current device can withstand without damage at rated voltage.
·RMAX = Maximum resistance of device in initial (un-soldered) state.
·RMIN = Minimum resistance of device in initial (un-soldered) state.
Packing quantity: 005,010,020,035,110,150,175,200 4500PCS/Reel
Packing quantity: 050,075,
4000PCS/Reel
1.00
0.015
0.07
Operating temperature: -40℃ ~+85℃
Specifications are subject to change without notice
HUAAN LIMITED
2
www.huaandz.com
[e-mail]
Tel:[phone]