JK-MSMD010 Datasheet, PDF (2/2 Pages) HuaXinAn Electronics CO.,LTD – Resettable Fuse PTC

Electrical characteristics(25℃)
SMD1812 Series
Part Number
Ih
(A)
It(A)
Vmax(
V)
Imax
(A)
Pd(W)
Trip
Current(A)
Trip Rmin R1max
Time(S) (Ω） (Ω)
JK-mSMD010 0.10 0.30 30.0 100 0.8
0.5
1.50 0.750 15.000
JK-mSMD014 0.14 0.34 33.0 100 0.8
1.5
0.15 0.650 6.000
JK-mSMD014-60V 0.14 0.34 60.0 100 0.8
1.5
0.15 0.650 6.000
JK-mSMD020 0.20 0.40 30.0 100 0.8
8.0
0.02 0.350 5.000
JK-mSMD030 0.30 0.60 30.0 100 0.8
8.0
0.10 0.250 3.000
JK-mSMD050 0.50 1.00 15.0 100 0.8
8.0
0.15 0.250 1.000
JK-mSMD075 0.75 1.50 13.2 100 0.8
8.0
0.20 0.090 0.450
JK-mSMD0110 1.10 2.20 8.0
100 0.8
8.0
0.30 0.050 0.250
JK-mSMD0110-16V 1.10 2.20 16.0
100
0.8
8.0
0.30 0.050 0.250
JK-mSMD125 1.25 2.50 16.0 100 0.8
8.0
0.40 0.050 0.140
JK-mSMD150 1.50 3.00 8.0
100 0.8
8.0
0.50 0.040 0.160
JK-mSMD160 1.60 2.80 8.0
100 0.8
8.0
1.00 0.030 0.130
JK-mSMD200 2.00 4.00 8.0
100 0.8
8.0
2.00 0.020 0.100
JK-mSMD260 2.60 5.00 8.0
100 0.8
8.0
2.50 0.015 0.050
JK-mSMD300 3.00 5.00 8.0
100 0.8
8.0
4.00 0.012 0.040
JK-mSMD350 3.00 6.00 6.0
100 2.0
10.0
0.008
·IH = Hold current: maximum current device will pass without tripping in 25℃ still air.
·IT = Trip current: minimum current at which the device will trip in 25℃ still air.
·VMAXi = Maximum interrupt voltage device can withstand without damage at rated current.
·IMAX = Maximum fault current device can withstand without damage at rated voltage.
·RMAX = Maximum resistance of device in initial (un-soldered) state.
·RMIN = Minimum resistance of device in initial (un-soldered) state.
Packing quantity:010,014,020,030,200,260,300,350, 1500PCS/Reel
Packing quantity:050,075,110,125,150,160,
2000PCS/Reel
Specifications are subject to change without notice
2
HUAAN LIMITED
www.huaandz.com
0.008 0.030
[e-mail]
Tel:[phone]