P6KE6.8CA Datasheet, PDF (1/5 Pages) ON Semiconductor – 600 Watt Peak Power Surmetic−40 Zener Transient Voltage Suppressors

Transient Voltage Suppressors
P6KE6.8CA Thru P6KE600CA
TVS Diodes - 600W > P6KE Series
Description
The P6KE series is designed specifically to protect sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
• For surface mounted applications in order to optimize board space
• Reliable low cost construction utilizing molded plastic technique
• Plastic material has UL flammability classification 94V-O
• Typical IR less than 1uA above 12V
• Fast response time: typically less than 1.0ps from 0 Volts to VBR min
• Glass passivated junction
• Low inductance
• High Temperature soldering: 260℃/10 seconds at terminals
Applications
• I/O interface • AC/DC power supply
• Low frequency signal transmission line (RS232, RS485, etc.)
Electrical Characteristics
Package: DO-204AC / DO-15
Parameter
Symbol
Value
Peak Pulse Power Dissipation at TA=25℃ by 10x1000μs waveform
(Fig.1)(Note 1), (Note 2)
Power Dissipation on infinite heat sink at TA=50℃
PPPM
600
PM(AV)
5
Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3)
IFSM
100
Maximum Instantaneous Forward Voltage at 25A for Unidirectional only
(Note 4)
Operating Junction and Storage Temperature Range
VF
TJ, TSTG
3.5/5
-65 to 150
Typical Thermal Resistance Junction to Lead
RθJL
20
Typical Thermal Resistance Junction to Ambient
RθJA
75
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only.
3. VF < 3.5V for VBR ≤ 200V and VF< 6.5V for VBR ≥ 201V.
Unit
W
W
A
V
℃
℃/W
℃/W
HUAAN LIMITED
1
www.huaandz.com
[e-mail]