5KP5.0A Datasheet, PDF (1/5 Pages) Littelfuse – Silicon Avalanche Diodes - 5000 Watt Axial Leaded Transient Voltage Suppressor

Transient Voltage Suppressors
5KP5.0A Thru 5KP250CA
TVS Diodes - 5000W > 5KP Series
Description
The 5KP series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
and other transient voltage events.
Features
• Plastic material has UL flammability classification 94V-O
• Typical IR less than 1uA above 12V
• Fast response time
• Glass passivated junction
• Low zener impedance• Excellent clamping capability
• Low inductance
• High Temperature soldering: 260℃/10 seconds at terminals
Applications
• I/O interface • AC/DC power supply
• Low frequency signal transmission line.
Electrical Characteristics
Package: P600
Parameter
Symbol
Value
Peak Pulse Power Dissipation at TA=25℃ by 10 / 1000μs waveform
(Fig.1)(Note 1)
Steady state power dissipation at TL=75℃ (Fig.5)
PPPM
PM(AV)
5000
8
Peak Forward Surge Current, 8.3ms Single Half Sine Wave superimposed on
rated load, (JEDEC Method) (Note2, Fig.6)
Operating Junction and Storage Temperature Range
IFSM
TJ, TSTG
400
-55 to 175
Typical Thermal Resistance Junction to Lead
RθJL
15
Typical Thermal Resistance Junction to Ambient
RθJA
75
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig. 2.
2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.
Unit
W
W
A
℃
℃/W
℃/W
HUAAN LIMITED
1
www.huaandz.com
[e-mail]