HSMA400X Datasheet, PDF (1/3 Pages) Hi-Sincerity Mocroelectronics – 1.0AMP. SURFACE MOUNT RECTIFIERS

HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : Preliminary Data
Issued Date : 2000.04.15
Revised Date : 2000.04.20
Page No. : 1/3
HSMA400X Series
1.0AMP. SURFACE MOUNT RECTIFIERS
Features
• For surface mounted application
• Low forward voltage drop
• High current capability
• Easy pick and place
• High surge current capability
• Plastic material used carries Underwriters Laboratory Classification 94V-0
• High temperature soldering: 250°C/10 seconds at terminals
Mechanical Data
• Case: SMA/DO-214AC Molded Plastic.
• Terminals: Solder plated.
• Polarity: Indicated by cathode band.
• Packaging: 12mm tape per EIA STD RS-481.
• Weight: 0.064 gram.
Maximum Ratings and Electrical Characteristics
Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive
or inductive load. For capacitive load, derate current by 20%.
Type Number
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average
Forward Rectified Current @TL=110°C
Peak Forward Surge Current, 8.3ms Single
Half Sine-wave Superimposed on
Rated Load(JEDEC method)
Maximum Instantaneous
Forward Voltage @ 1.0A
Maximum DC Reverse Current at
Rated DC Blocking Voltage
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance (Note 2)
Operating Temperature Range Tj
Storage Temperature Range Tstg
HSMA
4001
HSMA
4002
HSMA
4003
HSMA
4004
HSMA
4005
HSMA
4006
HSMA
4007
Units
50 100 200 400 600 800 1000 V
35 70 140 280 420 560 700 V
50 100 200 400 600 800 1000 V
1
A
30
A
1.1
V
5(@Ta=25°C)
50(@Ta=125°C)
uA
1.8
uS
12
pF
-55 to +150
°C
-55 to +150
°C
Note1: Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A
Note2: Measured at 1 MHz and Applied VR=4.0Volts
HSMC Product Specification