English
Language : 

H277 Datasheet, PDF (1/7 Pages) Hi-Sincerity Mocroelectronics – On-chip Hall sensor
HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : IC200907
Issued Date : 2009.04.03
Revised Date :2009.10.29
Page No. : 1/7
H277
Complementary Output Hall Effect Sensor IC
General Description
H277 is designed to integrate Hall sensor with output driver together on the
same chip. It is suitable for dual coils brush-less DC motors, dual coils brush-less DC fan, speed measurement,
and revolution counting.
It includes a band-gap reference voltage source, a Hall device, an amplifier, a hysteretic controller and an open-
collector output drive capable of sinking up to 300mA current load. An on-chip protection diode is implemented to
prevent reverse power fault.
H277 has a control circuit to prevent “dead angle” from logic race condition in DC Fan. It has excellent
characteristic of temperature compensation. The internal temperature compensated voltage source can let sensor
to get uniform sensitivity in a wide temperature range.
It is rated for operation over temperature rage from -20oC to +85oC and voltage ranges from 3.0V to 20V.
Features
• On-chip Hall sensor
• 3.0V to 20V operating voltage
• Internal Temperature compensation
• Special design providing logic race condition immunity, shorter switching time, and good switch reliability
• 300mA output sink current
• Internal on-chip protection diode
• SIP-4L Package
Applications
• Dual-coil Brush-less DC Motor
• Dual-coil Brush-less DC Fan
• Revolution Counting
• Speed Measurement
Typical Application Circuit (Brush-Less DC Fan)
H277
Fig.2 H277 Application Circuit
HSMC Product Specification