|
H177 Datasheet, PDF (1/6 Pages) Hi-Sincerity Mocroelectronics – Wide range of supply voltage: 3.5V to 28V. | |||
|
HI-SINCERITY
MICROELECTRONICS GROUP.
Spec. No. : IC200914
Issued Date : 2009.08.12
Revised Date :2010,01,18
Page No. : 1/6
H177
Single Output Hall Effect Latch IC
General Description
H177 is an integrated Hall effect latched sensor with output pull-high resistor driver
designed for electronic commutation of brushless DC motor applications and contactless
SIP-3L Package
switches.
The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage, and a
Schmitt trigger to provide switching hysteresis for noise rejection, and output driver with pull-high resistor. An internal bandgap
regulator is used to provide temperature compensated supply voltage for internal circuits and allows a wide operating supply
range.If a magnetic flux density larger than threshold Bop, DO is turned on (Low). The output state is held until a magnetic flux
density reversal falls below Brp causing DO to be turned off (High).
H177 is rated for operation over temperature range from -20â to 85â and voltage range from 3.5V to 28V. The devices are
available in low cost die forms or rugged 3 pin SIP packages.
Features
⢠Wide range of supply voltage: 3.5V to 28V.
⢠Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range.
⢠High sensitivity with a small magnet.
⢠TTL and MOS ICs directly drivable by output.
⢠Build in protection diode for chip reverse power connecting.
⢠Package: SIP-3L.
Applications
⢠Brushless DC Motor
⢠Brushless DC Fan
⢠Position Sensors
⢠Rotation Sensors
⢠Revolution Counting
⢠Speed Measurement
⢠Keyboard Switches
⢠Micro-switches
H177
HSMC Product Specification
|
▷ |