H1117E Datasheet, PDF (1/4 Pages) Hi-Sincerity Mocroelectronics – 1A LOW DROPOUT POSITIVE VOLTAGE REGULATOR

HI-SINCERITY
MICROELECTRONICS CORP.
Spec. No. : Preliminary Data
Issued Date : 1998.07.15
Revised Date : 1999.08.01
Page No. : 1/4
H1117E Series
1A LOW DROPOUT POSITIVE VOLTAGE REGULATOR
Features
• Low Dropout Voltage 1.2V at 1A
• Adjustable or Fixed Voltage
• Maximum Line Regulation 0.45%
• Maximum Load Regulation 0.4%
• Adjust Pin Current Less Than 90 uA
• Over Current Protection
• Thermal Protection
Applications
• High Efficiency Linear Regulators
• 5V to 3.3V Voltage Converter
• Battery Charger
General Description
The H1117E is a 1A low-dropout positive voltage regulator. It is available in fixed and adjustable output voltage
versions. Over current and thermal protection are integrated onto the chip. Output current will decrease while it
reaches the pre-set current or temperature limit. The dropout voltage is specified at 1.2V Maximum at full rated
output current. H1117E Series provides excellent regulation over variations due to changes in line, load and
temperature. H1117E is three terminal regulator and available in popular packages.
Device Selection Guide
Device
H1117E(Adj)
H1117-3.3E
Output Voltage
1.3V to 4V
3.3
Package
TO-220AB
Absolute Maximum Ratings
Parameter
Input Voltage
Power Dissipation
Thermal Resistance Junction To Case TO-220AB
Thermal Resistance Junction To Ambient TO-220AB
Operating Junction Temperature Range
Storage Temperature Range
Lead Temperature (Soldering) 10 Sec
Typical Application
Symbol
V_IN
P_D
θ_JC
θ_JA
T_j
T_STG
T_LEAD
Maximum
20
Internally Limited
3
50
0 To 125
-65 To 150
260
Units
V
W
°C/W
°C/W
°C
°C
°C
H1117E
+
4.75V
to 20V
DC
10uF
TAN
GND
10uF
TAN
Input Range Depends On VO
Please Refer To Electrical Characteristics.
Load
HSMC Product Specification