HFBR-0507 Datasheet, PDF (9/12 Pages) Agilent(Hewlett-Packard) – 125 Megabaud Versatile Link The Versatile Fiber Optic Connection

125 Megabaud Versatile Link
Receiver
HFBR-25X6 Series
Description
The HFBR-25X6 receivers contain
a PIN photodiode and
transimpedance pre-amplifier
circuit in a horizontal (HFBR-
2526) or vertical (HFBR-2536)
blue housing, and are designed to
interface to 1mm diameter plastic
optical fiber or 200 µm hard clad
silica glass optical fiber. The
receivers convert a received
optical signal to an analog output
voltage. Follow-on circuitry can
optimize link performance for a
variety of distance and data rate
requirements. Electrical
bandwidth greater than 65 MHz
allows design of high speed data
links with plastic or hard clad
silica optical fiber. Refer to
Application Note 1066 for details
for recommended interface
circuits.
GROUND
4 ^VCC
3 ^GROUND
GROUND
2 ^GROUND
1 ^SIGNAL
SEE NOTES 2, 4, 9
Absolute Maximum Ratings
Parameter
Storage Temperature
Operating Temperature
Lead Soldering Temperature
Cycle Time
Signal Pin Voltage
Supply Voltage
Output Current
Symbol
T_S
T_A
V_O
V_CC
I_O
Min.
- 40
0
-0.5
-0.5
Max.
+75
+70
260
10
V_CC
6.0
25
Unit
°C
°C
°C
s
V
V
mA
Reference
Note 1
CAUTION: The small junction sizes inherent to the design of this component increase the component's suscepti-
bility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in
handling and assembly of this component to prevent damage and/or degradation which may be induced by
ESD.
25