HEDS-9710 Datasheet, PDF (8/8 Pages) Agilent(Hewlett-Packard) – 200 lpi Analog Output Small Optical Encoder Modules

Mounting Considerations
Note: These dimensions include shaft end play and codewheel warp.
All dimensions for mounting the module and codewheel/codestrip should be measured with respect to the two mounting posts, shown
above.
Mounting Tolerances
Case 1 specifies the mounting tolerances required on Rm in order to achieve the respective encoding
characteristics shown on page 4. The mounting tolerances are as follows:
Case 1: Rm ± 0.13 mm (.005 inches)
Recommended Screw Size: M2.5 x 0.45 or 2-56
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: [phone] or
[phone]
Europe: [phone]
China: 10800 650 0017
Hong Kong: ([phone]
India, Australia, New Zealand: ([phone]
Japan: ([phone](Domestic/Interna-
tional), or 0120-61-1280(Domestic Only)
Korea: ([phone]
Malaysia, Singapore: ([phone]
Taiwan: ([phone]
Data subject to change.
Copyright © 2002 Agilent Technologies, Inc.
Obsoletes 5988-3614EN
May 10, 2002
5988-6261EN