HDSP-S6 Datasheet, PDF (8/12 Pages) Agilent(Hewlett-Packard) – General Purpose 5 x 8 Dot Matrix Alphanumeric Displays

Absolute Maximum Ratings at T_A = 25˚C
Parameter
Average Power per Dot^[1]
Peak Forward Current per Dot^[1]
(1/8 Duty Cycle at 10 KHz)
Average Forward Current per Dot
GaP Red
65
80
25^[1,2]
GaP Green
65
100
25^[1,3]
Units
mW
mA
mA
Reverse Voltage per Dot
3
3
V
Operating Temperature
–35 to +85
–35 to +85
°C
Storage Temperature
–35 to +85
–35 to +85
°C
Wave Soldering Temperature for 3 seconds^[4]
(2 mm [0.078 in.] below Body)
250
250
°C
Notes:
1. Do not exceed maximum average current per dot.
2. Derate above 25°C at 0.20 mA/°C.
3. Derate above 25°C at 0.33 mA/°C.
4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds.
8