N7800A Datasheet, PDF (7/9 Pages) Agilent(Hewlett-Packard) – Calibration and Adjustment Software for Agilent RF/W Instruments

Instruments Covered
For the latest list of instruments covered please see:
agilent.com/find/calibrationsoftware
Product family
PSA spectrum analyzers
ESA spectrum analyzers
VSA vector signal analyzer
VSA vector signal analyzer
CSA spectrum analyzer
EXA signal analyzer
MXA signal analyzer
EMI receiver
PSG signal generators
ESG signal generators
MXG signal generators
E8663B signal generator
NFA noise figure analyzers
Wireless connectivity
test set
PNA network analyzers
Upconverter synthetic
instrument
P-series power meters
Wireless comms test set
U2000-series power sensors
Wireless network test set
Downconverter synthetic
instrument
Models
E4440A, E4443A, E4445A, E4446A, E4447A, E4448A
E4401B, E4402B, E4403B, E4404B, E4405B,
E4407B, E4408B, E4411B, E7401A, E7402A,
E7403A, E7404A, E7405A
E4406A
896xxA
N1996A
N9010A
N9020A
N9039A
E8241A, E8244A, E8247C, E8251A, E8254A, E8257C,
E8257D, E8267C, E8267D
E4428C, E4438C, E4400B, E4420B, E4421B, E4422B,
E4423B, E4424B, E4425B, E4426B, E4430B, E4431B,
E4432B, E4433B, E4434B, E4435B, E4436B, E4437B
N5181A, N5182A
E8663B
N8972A, N8973A, N8974A, N8975A
N4010A
E8356A, E8357A, E8358A, E8361A, E8362A, E8362B,
E8363A, E8363B, E8364A, E8364B, E8801A, E8802A,
E8803A, N3381A, N2282A, N3383A, N5230A
N8211A, N8212A
N1911A, N1912A, add N8262A
E6601A
U200xA
N8300A
N8201A
Minimum PC System
Requirements
● PC Hardware
• 450 MHz Pentium II
(600 MHz or faster recommended)
• 128 MB RAM
(256 MB or more recommended)
• 200 MB available hard drive
NOTE: Data storage will average
approximately 200 MB of disk
space per 100 full instrument
calibrations. Test data is saved for
every test that is run within TME
therefore overall data storage
needs will vary depending on the
number of instruments calibrated.
• Minimum 800 x 600 display with
256 colors
• GPIB card (One of the following
cards must be installed prior to
installing this application):
• Agilent 82350A*
• NI GPIB/TNT**
• NI PCI-GPIB**
● Operating system supported:
• Windows 2000 (SP3 or higher)
• XP Professional (SP1 or SP2)
● Additional software:
• I/O Libraries
– Agilent VISA* (Recommended
version M.01.01.04 or later)
or
– NI VISA** (Recommended
version 3.2 or later ***)
• Web Browser
– Internet Explorer (IE) 5.5 or higher
* Agilent Visa & GPIB drivers can be
downloaded from the Agilent Technologies
website at: www.agilent.com
** National Instruments Visa library can be
downloaded from the website: www.ni.com
*** Version 3.2 of the National Instruments VISA
will fix an issue found in the TME installation.
If any version of NI VISA prior to 3.2 is
installed on the target system, you may
experience an error during installation of the
Agilent IO library to be used with TME.
The kernel error that occurs will not affect
the performance of TME once the installation
completes. To avoid the error, upgrade to
Version 3.2 of the NI VISA before executing
the TME installation.
6