HFBR-53D5 Datasheet, PDF (6/16 Pages) Agilent(Hewlett-Packard) – 1 x 9 Fiber Optic Transceivers for Gigabit Ethernet

6
Ethernet evaluation board (Part
# HFBR-0535). This board
allows testing of the fiber-optic
VCSEL transceiver. It includes
the HFBR-53D5 transceiver, test
board, and application
instructions. For single mode
transceiver evaluation the
HFCT-53D5 can be substituted
on this evaluation board. In addi-
tion, a complementary evaluation
board is available for the
HDMP-1636A 1250 MBd
Gigabit Ethernet serializer/
deserializer (SERDES) IC. (Part #
HDMP-163k) Please contact your
local Field Sales representative
for ordering details.
Absolute Maximum Ratings
Parameter
Storage Temperature
Supply Voltage
Data Input Voltage
Transmitter Differential Input Voltage
Output Current
Relative Humidity
Symbol
T_S
V_CC
V_I
V_D
I_D
RH
Min.
–40
–0.5
–0.5
5
Typ.
Max.
100
7.0
V_CC
1.6
50
95
Unit
˚C
V
V
V
mA
%
Reference
1
2
Recommended Operating Conditions
Parameter
Symbol
Ambient Operating Temperature
T_A
Case Temperature
T_C
Supply Voltage
V_CC
Power Supply Rejection
PSR
Transmitter Data Input Voltage – Low
Transmitter Data Input Voltage – High
Transmitter Differential Input Voltage
Data Output Load
Signal Detect Output Load
V_IL–V_CC
V_IH–V_CC
V_D
R_DL
R_SDL
Min.
0
4.75
–1.810
–1.165
0.3
50
50
Typ.
50
Max.
70
90
5.25
–1.475
–0.880
1.6
Unit
˚C
˚C
V
mV_P–P
V
V
V
Ω
Ω
Reference
3
4
5
5
6
6
Process Compatibility
Parameter
Hand Lead Soldering Temperature/Time
Wave Soldering and Aqueous Wash
Symbol
T_SOLD/t_SOLD
T_SOLD/t_SOLD
Min. Typ.
Max. Unit
260/10 ˚C/sec.
260/10 ˚C/sec.
Reference
7
Notes:
1. The transceiver is class 1 eye-safe up to VCC = 7 V.
2. This is the maximum voltage that can be applied across the Differential Transmitter Data Inputs without damaging the input
circuit.
3. Case temperature measurement referenced to the center-top of the internal metal transmitter shield.
4. Tested with a 50 mVP–P sinusoidal signal in the frequency range from 500 Hz to 1500 kHz on the VCC supply with the
recommended power supply filter in place. Typically less than a 0.25 dB change in sensitivity is experienced.
5. Compatible with 10 K, 10 KH, and 100 K ECL and PECL input signals.
6. The outputs are terminated to VCC –2 V.
7. Aqueous wash pressure < 110 psi.