HDSP-5700 Datasheet, PDF (6/8 Pages) Agilent(Hewlett-Packard) – 14.2 mm (0.56 inch) Seven Segment Displays

6
High Performance Green
Device
Series
HDSP-
Parameter
Luminous Intensity/Segment^[1,2]
(Digit Average)`
56XX
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength^[3,7]
Reverse Voltage/Segment or DP^[4]
Temperature Coefficient of
V_F/Segment or DP
Thermal Resistance LED Junction-
to-Pin
Symbol Min. Typ. Max. Units Test Conditions
900 2500
I_V
3100
I_F = 10 mA
µcd
I_F = 60 mA Peak:
1 of 6 df
V_F
2.1 2.5
V I_F = 10 mA
λ_PEAK
566
nm
λ_d
571 577 nm
V_R
3.0 50
V I_R = 100 µA
∆V_F/°C
-2
mV/°C
Rθ_J-Pin
345
°C/W/
Seg
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ_d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are
pin for pin compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin
for pin compatible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by
a number adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs.
Pulse Duration – Red.
Figure 2. Maximum Tolerable Peak Current
vs. Pulse Duration – AlGaAs Red.