HBCC-1570 Datasheet, PDF (6/8 Pages) Agilent(Hewlett-Packard) – Optical Reflective Sensors

Bin Table
Bin#
1
2
3
4
5
6
Ipr Limits (nA)
Min.
160
215
255
300
360
430
Max.
225
270
313
375
440
555
Product Marking
The photocurrent binning of the
sensor is incorporated as part of
the product marking format. The
Bin # is represented as the last
number (N) on the last line of
marking.
HP
HBCC-15XX
XXXXXXXN
N = bin number
Bin Availability
The entire available distribution of
parts, appropriately marked, will
be shipped. Requests for indi-
vidual bin selections cannot be
honored.
Binning and
Temperature Effects
Test algorithm bins units to the
lower bin number if a unit is in the
bin overlap region. Such units can
cross bin boundaries as tempera-
ture changes. (Ambient tempera-
ture affects LED efficiency slightly
and may cause several percentage
changes in Ipr.) Bin numbers are
for “reference only” and do not
constitute an absolute guarantee.
The output of all LEDs degrades
with time, depending on drive
conditions and temperature. LED
degradation is minimized by the
drive conditions generated by both
the HBCC-0500 and HBCC-0600,
(when used as specified).
Warranty and Service
HP Optical Reflective Sensors are
warranted for a period of one year
after purchase covering defects in
material and workmanship.
Hewlett-Packard will repair or, at
its option, replace products that
prove to be defective in material or
workmanship under proper use
during the warranty period.
NO OTHER WARRANTIES ARE
EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED
TO THE IMPLIED WARRANTIES
OF MERCHANT ABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. HEWLETT-PACKARD
IS NOT LIABLE FOR CONSE-
QUENTIAL DAMAGES.
For additional warranty or service
information please contact your
local Hewlett-Packard sales
representative or authorized
distributor.
4-12