W2642A Datasheet, PDF (5/8 Pages) Agilent(Hewlett-Packard) – DisplayPort AUX Channel Controller

Test connectivity
A key component in source or sink test
solutions is the W2641A test point
access adaptor. The W2641A was
designed with AUX channel access
through a 14-pin digital connector.
An adaptor board as illustrated in
Figures 6 and 7, connects to the device
under test to the W2642A through a
DisplayPort cable. The adaptor board,
and DisplayPort and LAN cables, are
shipped with each W2642A.
Figure 8: W2641A DisplayPort test point access adaptor.
Ordering DisplayPort Solutions with the W2642A
Expanding your toolset
Because the W2642A AUX channel
controller is based on the Quantum
Data 882E instrument you get access to
all the capabilities that Quantum Data
provides with this platform. Quantum
Data is the leader for DisplayPort link
layer compliance testing, DisplayPort
high definition content protection
and also for DisplayPort AUX channel
analysis. These capabilities are not
shipped with the 882E but they are
available as aftermarket upgrades
through your Quantum Data distributor.
Sink test
When purchasing a full automated sink test solution, order the following:
Model Number
W2642A
W2641A
N5460A
N4903A
Option G07
Option J10
Option J11
Description
DisplayPort AUX channel controller
DisplayPort test point access adapter
SMP right angle cables (recommended)
J-BERT
150 Mb/s to 7 Gb/s
Jitter injection
SSC clocking
Quantity
1
1
1
1
1
1
N4915A-006
ISI generator
1
N5990A-010,-155
Test automation software
1 ea.
For Calibration
BIT-DP-RTF-0001
Receptacle DisplayPort fixture
1
DSA90804A
Infiniium Series oscilloscope
1
Table 1: Sink test solution elements
5