HCPL0630 Datasheet, PDF (4/10 Pages) Agilent(Hewlett-Packard) – Dual Channel, High CMR, High Speed, TTL Compatible Optocouplers 8 Pin DIP and SOIC-8

4
Recommended Operation Conditions
Parameter
Input Current, Low Level
Each Channel
Input Current, High Level
Each Channel
Supply Voltage, Output
Fan Out (@ R_L = 1 kΩ)
Each Channel
Output Pull-up Resistor
Operating Temperature
Symbol Min.
I_FL*
0
I_FH
5
V_CC
4.5
N
R_L
330
T_A
-40
Max. Units
250
µA
15
mA
5.5
V
5 TTL Loads
4k
Ω
85
°C
*The off condition can also be guaranteed by ensuring that V_FL ≤ 0.8 volts.
Absolute Maximum Ratings
(No Derating Required up to 85°C)
Storage Temperature ................................................. -55°C to +125°C
Operating Temperature ............................................... -40°C to +85°C
Lead Solder Temperature (8 Pin DIP) .......................... 260°C for 10 s
(1.6 mm below seating plane)
Average Forward Input Current
(each channel, See note 2) ...................................................... 15 mA
Reverse Input Voltage (each channel) .......................................... 5 V
Supply Voltage – V (1 Minute Maximum) ................................ 7 V
CC
Output Collector Current – I_O (each channel) .......................... 50 mA
Output Collector Voltage – V (each channel)** ........................... 7 V
O
Output Collector Power Dissipation (each channel) ........... 60 mW^[17]
Infrared and Vapor Phase Reflow
Temperature (SOIC-8 & Option #300) ............ See Thermal Profile
**Selection for higher output voltages up to 20 V is available.
Thermal Profile
260
240
220
∆T = 115°C, 0.3°C/SEC
200
180
160
140
120
100
80
∆T = 100°C, 1.5°C/SEC
60
40
20
0
0
1
2
3
4
5
6
7
8
TIME – MINUTES
∆T = 145°C, 1°C/SEC
9
10
11 12
Maximum Solder Reflow Thermal Profile. (Note: Use of non-chlorine activated fluxes is highly recommended.)