IAM-93516 Datasheet, PDF (3/10 Pages) Agilent(Hewlett-Packard) – High Linearity Integrated GaAs Mixer

3.0 IAM-93516 Electrical Specifications^[6,8]
T_A = 25^oC, DC = 5V, RF Freq = 1.91GHz, Pin_RF = -10dBm, LO Freq = 1.7GHz, Pin_LO = 0dBm (unless otherwise specified)
Symbol
Parameter and Test Condition
Units
Min.
Typ.
Max.
Id ^[7]
Device Current
mA
95.0
111.2
125.0
G_C
IIP3 ^[8]
Conversion Gain
Output Third Order Intercept Point
dB
7.9
dBm
20.5
9.4
10.9
23.1
-
NF
SSB Noise Figure
dB
-
11.6
-
P1dB
Output Power at 1dB Gain Compression
dBm
-
19.3
-
RL_RF
RL_LO
RL_IF
ISOL_L-R
ISOL_L-I
ISOL_R-L
RF Port Return Loss
LO Port Return Loss
IF Port Return Loss
LO-RF Isolation
LO-IF Isolation
RF-IF Isolation
dB
-
dB
-
dB
-
dB
-
dB
-
dB
-
12.0
-
20.0
-
11.0
-
26.0
-
20.0
-
32.0
-
Notes:
5. Distribution data sample size is 510 samples taken from 3 different wafers lots. Future wafers allocated to this product may have nominal values
anywhere between the upper and lower limits.
6. Measurements were made on a production test board, which represents a trade-off between optimal Gain, IIP3, NF, P1dB and isolation. Board losses
of 0.1dB at the RF input and IF amplifier output have been compensated. Balun loss of 0.57dB which was obtained from the Toko’s supplied s-
parameter file is also compensated. The total IF amplifier output loss is 0.67dB.
7. The device current is measured without LO signal. At LO=0dBm, the current reduces by around 6 to 7mA.
8. Gain, P1dB, isolation and return loss test conditions: F_RF =1.91GHz, F_LO = 1.7GHz, F_IF = 210MHz, Pin_RF = -10dBm, Pin_LO = 0dBm.
IIP3 test condition: F_RF1 = 1.91GHz, F_RF2 = 1.89GHz, F_LO = 1.7GHz, Pin_RF = -10dBm, Pin_LO = 0dBm.
4.0 IAM-93516 Typical Performance^[9,10]
T_A = 25^oC, DC = 5V, RF Freq = 1.91GHz, Pin_RF = -10dBm, LO Freq = 1.7GHz (unless otherwise specified)
1nH
39nH 22 Ohm
18pF
LO +
1.5nH
RF
1.5pF
LO -
3.3nH
3.3nH
0.4pF 1.5pF
Interstage Match
40nH
1000pF
Balun Transformer
Toko B4F
617DB-1018
IF
1000pF
Interstage Match
1nH
39nH 22 Ohm 18pF
0.4pF 1.5pF
40nH
Figure 4. IAM-93516 demoboard schematic optimally tuned at F_RF = 1.91GHz and F_LO = 1.7GHz
3