HDSP-076X Datasheet, PDF (3/8 Pages) Agilent(Hewlett-Packard) – Hexadecimal and Numeric Displays for Industrial Applications

3
Absolute Maximum Ratings
Description
Storage Temperature, Ambient
Operating Temperature, Ambient^[1]
Supply Voltage^[2]
Voltage Applied to Input Logic, dp and Enable Pins
Voltage Applied to Blanking Input^[2]
Maximum Solder Temperature at 1.59 mm (0.062 inch)
Below Seating Plane, t ≤ 5 seconds
Symbol
T_S
T_A
V_CC
V_I, V_DP, V_E
V_B
Min.
-65
-55
-0.5
-0.5
-0.5
Max.
+100
+85
+7.0
V_CC
V_CC
260
Unit
°C
°C
V
V
V
°C
Recommended Operating Conditions
Description
Supply Voltage^[2]
Operating Temperature, Ambient^[1]
Enable Pulse Width
Time Data Must Be Held Before Positive
Transition of Enable Line
Time Data Must Be Held After Positive
Transition of Enable Line
Enable Pulse Rise Time
Symbol
V_CC
T_A
t_W
t_SETUP
t_HOLD
t_TLH
Min.
4.5
-55
100
50
50
Nom.
5.0
Max.
5.5
+85
1.0
Unit
V
°C
nsec
nsec
nsec
msec
Optical Characteristics at T_A = 25°C, V_CC = 5.0 V
Device
Description
HDSP-0760 Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5]
HDSP-0770 Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5]
HDSP-0860 Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5,6]
HDSP-0960 Luminous Intensity per LED (Digit Average)^[3,4]
Series
Peak Wavelength
Dominant Wavelength^[5,6]
Symbol
I_V
λ_PEAK
λ_d
I_V
λ_PEAK
λ_d
I_V
λ_PEAK
λ_d
I_V
λ_PEAK
λ_d
Min.
65
260
215
298
Typ.
140
635
626
620
635
626
490
583
585
1100
568
574
Max.
Unit
µcd
nm
nm
µcd
nm
nm
µcd
nm
nm
µcd
nm
nm
Notes:
1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is Rθ_JA = 50°C/W/
device. The device package thermal resistance is Rθ_J-PIN = 15°C/W/device. The thermal resistance device pin-to-ambient through
the PC board should not exceed 35°C/W/device for operation at T_A = +85°C.
2. Voltage values are with respect to device ground, pin 6.
3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back of
the display package. Case temperature of the device immediately prior to the light measurement is equal to 25°C.