English
Language : 

81600B Datasheet, PDF (3/12 Pages) Agilent(Hewlett-Packard) – Tunable Laser Source Family
81600B opt. 201 All-Band Tunable Laser Source, 1455 nm – 1640 nm, low SSE
Agilent 81600B opt. 201
2.4
Wavelength range
1455 nm to 1640 nm
Wavelength resolution
0.1 pm, 12.5 MHz at 1550 nm
Mode-hop free tunability
full wavelength range; see page 10 for conditions to assure mode-hop free
continuous sweeps
Maximum sweep speed
80 nm/s
Stepped mode
Continuous sweep mode (typ.)
at 5 nm/s
at 40 nm/s
at 80 nm/s
Absolute wavelength accuracy [1]
±10 pm, typ. ± 3.6 pm ±4.0 pm
±4.6 pm
±6.1 pm
Relative wavelength accuracy [1]
±5 pm, typ. ±2 pm
±2.4 pm
±2.8 pm
±4.0 pm
Wavelength repeatability
Wavelength stability [4] (typ.)
±0.8 pm, typ. ±0.5 pm ±0.3 pm
d ±1 pm, 24 hours
±0.4 pm
±0.7 pm
Linewidth (typ.), coherence control off
Effective linewidth (typ.), coherence ctrl. On
100 kHz
> 50 MHz (1475 nm – 1625 nm, at max. constant output power)
Output 1 (low SSE)
Output 2 (high power)
Maximum output power
(continuous power during sweep)
t +3 dBm peak (typ.)
t +2 dBm (1520 nm – 1610 nm)
t –2 dBm (1475 nm – 1625 nm)
t –7 dBm (1455 nm –1640 nm)
t +9 dBm peak (typ.)
t +8 dBm (1520 nm –1610 nm)
t +4 dBm (1475 nm – 1625 nm)
t –1 dBm (1455 nm – 1640 nm)
Attenuation
max. 60 dB
Power repeatability (typ.)
±0.003 dB
Power stability [4]
±0.01 dB, 1 hour
typ. ±0.03 dB, 24 hours
Power linearity
±0.1 dB
±0.1 dB
(±0.3 dB in attenuation mode)
Power flatness versus wavelength
±0.25 dB [3], typ. ±0.1 dB
±0.3 dB [3], typ. ±0.15 dB
Continuous sweep mode
at 5 nm/s
at 40 nm/s
at 80 nm/s
Dynamic power reproducibility (typ.)
±0.005 dB
±0.01 dB
±0.015 dB
Dynamic relative power flatness (typ.)
Side-mode suppression ratio (typ.)
±0.01 dB
t 60 dB (1520 nm – 1610 nm)
±0.02 dB
±0.04 dB
Output 1 (low SSE)
Output 2 (high power)
Signal to source
spontaneous emission ratio [2]
t 70 dB/nm (1520 nm –1610 nm)
t 80 dB/0.1 nm
(typ., 1520 nm – 1610 nm)
t 66 dB/nm (typ., 1475 nm – 1625 nm)
t 60 dB/nm (typ., 1455 nm – 1640 nm)
t 48 dB/nm (1520 nm – 1610 nm)
t 58 dB/0.1 nm
(typ., 1520 nm – 1610 nm)
t 43 dB/nm (1475 nm – 1625 nm)
t 37 dB/nm (1455 nm – 1640 nm)
Signal to total source
spontaneous emission ratio [2]
t 65 dB (1520 nm – 1610 nm)
t 57 dB (typ., 1455 nm – 1640 nm)
t 30 dB (typ., 1520 nm – 1610 nm)
Relative intensity noise (RIN) (0.1 – 6 GHz) (typ.) [2] –145 dB/Hz (1520 nm – 1610 nm)
[1] Valid for one month and within a ±4.4 K temperature range after automatic wavelength zeroing.
[2] At maximum output power as specified per wavelength range.
[3] Wavelength range 1455 nm – 1640 nm.
[4] At constant temperature ±1 K
Page 3 of 12