|
N2101B Datasheet, PDF (2/4 Pages) Agilent(Hewlett-Packard) – Bit Error Ratio Tester | |||
|
◁ |
Functionality
Features
The user friendly conï¬guration screen.
⢠Single instrument 3-slot wide PXI card containing pattern generation with
error detection
⢠Easily combined with DCA, Synthesizer, Pattern Generator or multiple
BERT modules in a PXI chassis
⢠Bit Error Rate in three modes - History (GUI only), Continuous, and Time Window
⢠Automatic clock data align
⢠Eye opening measured and/or extrapolated to a deï¬ned error rate
⢠Jitter Bathtub display and analysis
⢠Error injection: single error or error rate injection
⢠Signiï¬cantly smaller than a conventional BERT
⢠Differential data generation and analysis
⢠User selectable data patterns:
â« PRBS 2n -1, n=7, 9, 11,15, 23, 31
â« K28.5, K28.7 and CR Pat
⢠User deï¬ned patterns
â« 2048 bits maximum length
â« 16 Kbytes if pattern length is integer multiple of 64
⢠Pattern generation and BER measurements using the internal clock source
for the following rates:
â« 155 Mb/s
(OC-3/STM-1)
â« 622 Mb/s
(OC-12/STM-4)
â« 1.0625 Gb/s
(1xFibre Channel)
â« 1.25 Gb/s
(Gigabit Ethernet)
â« 2.125 Gb/s
(2xFibre Channel)
â« 2.488 Gb/s
(OC-48/STM-16)
â« 2.500 Gb/s
(Parallel Optics, PCI-Express)
â« 3.125 Gb/s
(Xaui)
â« 4.25 Gb/s
(4xFibre Channel)
â« 5.0 Gb/s
(Parallel Optics, PCI-Express II)
â« 6.25 Gb/s
(Double XAUI)
â« 8.5 Gb/s
(8xFibre Channel)
⢠Pattern generation and BER measurements using an external clock at any
rates from 622 Mb/s up to 10.3125 Gb/s. Therefore the N2101B can generate
patterns and perform BER measurements on these standard rates.
â« 9.95 Gb/s
(OC196/STM64)
â« 10.3125 Gb/s
(10 Gigabit Ethernet)
2
|
▷ |