 English |
|
|
|
|
|
|
|
| HMMC-3028 Datasheet, PDF (2/9 Pages) Agilent(Hewlett-Packard) – DC-12 GHz High Efficiency GaAs HBT MMIC Divide-by-8 Prescaler | |||
| |||
| ◁ |
dc Speciï¬cations/Physical Properties
(TA = 25°C, VCC â VEE = 5.0 volts, unless otherwise listed)
Symbol
Parameters/Conditions
VCC â VEE
Operating bias supply difference1
|ICC| or |IEE|
Bias supply current
(HIGH Output Power Conï¬guration2: VPwrSel = VEE)
Bias supply current
(LOW Output Power Conï¬guration: VPwrSel = open)
VRFin(q)
VRFout(q)
Quiescent dc voltage appearing at all RF ports
VLogic
Nominal ECL Logic Level
(VLogic contact self-bias voltage, generated on-chip)
Min.
Typ.
Max.
4.5
5.0
6.5
37
44
51
29
34
39
VCC
VCC -1.45 VCC -1.32 VCC -1.25
Notes
1. Prescaler will operate over full speciï¬ed supply voltage range, VCC or VEE not to exceed limits speciï¬ed in Absolute Maximum Ratings section.
2. High output power conï¬guration: Pout = 0 dBm (Vout = 0.5 Vp-p). Low output power conï¬guration: Pout = -6.0 dBm (Vout = 0.25 Vp-p)
Units
volts
mA
mA
volts
volts
RF Speciï¬cations
(TA = 25°C, Z0 = 50 â¦, VCC â VEE = 5.0 volts)
Symbol
Parameters/Conditions
(÷8)
Min.
Typ.
Max.
Æin(max)
Æin(min)
ÆSelf-Osc.
Maximum input frequency of operation
Minimum input frequency of operation1
(Pin = -10 dBm)
Output Self-Oscillation Frequency2
12
14
0.2
0.5
1.7
Pin
@ dc, (Square-wave input)
-15
> -25
+10
@ Æin = 500 MHz, (Sine-wave input)
-15
> -20
+10
Æin = 1 to 8 GHz
-15
> -20
+10
Æin = 8 to 10 GHz
-10
> -15
+5
Æin = 10 to 12 GHz
-5
> -10
-1
RL
Small-Signal Input/Output Return Loss (@ Æin < 12 GHz)
15
S12
Small-Signal Reverse Isolation (@ Æin < 12 GHz)
30
ÏN
SSB Phase noise (@ Pin = 0 dBm, 100 kHz offset from a
-153
Æout = 1.2 GHz Carrier)
Jitter
Input signal time variation @ zeroâcrossing
1
(Æin = 10 GHz, Pin = -10 dBm)
Tr or Tf
Output edge speed (10% to 90% rise/fall time)
70
Notes
1. For sine-wave input signal. Prescaler will operate down to D.C. for square-wave input signal. Minimum divide frequency limited by input slew-rate.
2. Prescaler may exhibit this output signal under bias in the absence of an RF input signal. This condition may be eliminated by use of the Pre-amp
Disable ( VDisable) feature, or the Differential Input de-biasing technique.
2
Units
GHz
GHz
GHz
dBm
dBm
dBm
dBm
dBm
dB
dB
dBc/Hz
ps
ps
|
▷ |
German
Russian
Spanish
Italian
Polish
Chinese
Japanese
Korean
French
Portuguese