HCPL2201 Datasheet, PDF (2/16 Pages) Agilent(Hewlett-Packard) – Very High CMR, Wide VCC Logic Gate Optocouplers

2
HCPL-2232 and HCNW2211
guarantees common mode
transient immunity of 10 kV/µs at
a common mode voltage of 1000
volts.
Selection Guide
The electrical and switching
characteristics of the HCPL-
22XX, HCPL-02XX and
HCNW22XX are guaranteed from
-40°C to +85°C and a V_CC from
4.5 volts to 20 volts. Low I_F and
wide V_CC range allow compatibil-
ity with TTL, LSTTL, and CMOS
logic and result in lower power
consumption compared to other
high speed couplers. Logic signals
are transmitted with a typical
propagation delay of 150 ns.
Minimum CMR
dV/dt
(V/µs)
1,000
V_CM (V)
50
2,500 400
5,000^[3] 300^[3]
1,000 50
Input
On-
Current
(mA)
1.6
1.8
1.6
1.6
1.8
2.0
8-Pin DIP (300 Mil)
Single
Channel
Package
Dual
Channel
Package
HCPL-2200^[1,2]
HCPL-2201
HCPL-2202
HCPL-2231
HCPL-2219^[1,2]
HCPL-2211
HCPL-2212
HCPL-2232
Small-
Outline SO-8
Single
Channel
Package
HCPL-0201
HCPL-0211
Widebody
(400 Mil)
Single
Channel
Package
HCNW2201
HCNW2211
Hermetic
Single and
Dual Channel
Packages
HCPL-52XX^[2]
HCPL-62XX^[2]
Notes:
1. HCPL-2200/2219 devices include output enable/disable function.
2. Technical data for the HCPL-2200/2219, HCPL-52XX and HCPL-62XX are on separate Agilent publications.
3. Minimum CMR of 10 kV/µs with V_CM = 1000 V can be achieved with input current, I_F, of 5 mA.
Ordering Information
Specify Part Number followed by Option Number (if desired).
Example:
HCPL-2211#XXX
060 = VDE 0884 V_IORM = 630 V peak Option*
300 = Gull Wing Surface Mount Option**
500 = Tape and Reel Packaging Option
Option data sheets available. Contact your Agilent sales representative or authorized distributor for
information.
*For HCPL-2211/2212 only.
**Gull wing surface mount option applies to through hole parts only.
Schematic
I_CC
8 ^VCC
2 ^IF
+
V_F
–
3
I_O
V_O
SHIELD
HCPL-2201/02/11/12
HCPL-0201/11
HCNW2201/11
GND
5
1 ^IF1
+
V_F1
–
2
SHIELD
3
–
V_F2
+
4 _IF2
SHIELD
HCPL-2231/32
I_CC
8 ^VCC
I_O1
V_O1
7
I_O2
V_O2
6
GND
5