VTO-8951 Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – Voltage Controlled Oscillator

Agilent VTO-8951
Voltage Controlled Oscillator
Data Sheet
Description
The VTO-8951 provides a funda-
mental, low jitter source as a key
component for the data re-timing
in the transmitter subsystem and
clock and data recovery in the
receiver of the 10 Gb fiber optic
systems.
Functional Block Diagram
Amp
Output
The oscillator uses an extremely
high performance low noise
Agilent Silicon Bipolar transistor
in conjunction with a
hyperabrupt varactor diode to
provide the tuning capability.
The oscillator output is then
coupled to through a bandpass
filter to the output.
Features
• Operating frequency:
9.50 to 11.0 GHz
• Output power (50Ω Load):
10 dBm minimum
• Modulation sensitivity:
150 to 250 MHz/V
• Tuning voltage:
0 to 10 Volts
• Low jitter
• Frequency drift over 0°C to +75°C:
100 MHz
• 0.5" D x 0.18" H
Applications
• Sonet, FEC and 10 Gbits Ethernet
Applications
• Industry standard package –
hermetic using thin film
construction
VTO-8951 Absolute Maximum Ratings^[1]
Parameter
Units
Ratings
Positive Supply Voltage
V
5.2
Tuning Voltage
V
+15
Operating Temperature
°C
-10 to +100
Storage Temperature
°C
-40 to +130
Note:
1. Operation of this device in excess of any of these limits may cause permanent damage.