|
INA-54063 Datasheet, PDF (1/10 Pages) Agilent(Hewlett-Packard) – 3.0 GHz Low Noise Silicon MMIC Amplifier | |||
|
3.0 GHz Low Noise Silicon MMIC
Amplifier
Technical Data
INA-54063
Features
⢠Ultra-Miniature Package
⢠Single 5 V Supply (29⣠mA)
⢠21.5 dB Gain (1.9 GHz)
⢠8.0 dBm P1dB (1.9 GHz)
⢠Positive Gain Slope
⢠Unconditionally Stable
Applications
⢠IF Amplifier for DBS
Downconverter, Cellular,
Cordless, Special Mobile
Radio, PCS, ISM, and
Wireless LAN Applications
Equivalent Circuit
(Simplified)
RF
INPUT
Surface Mount Package
SOT-363 (SC-70)
Pin Connections and
Package Marking
GND 1
GND 2
INPUT 3
6
OUTPUT
and Vd
5 GND
4 VCC
Note:
Package marking provides orientation
and identification.
Vd
RF
OUTPUT
and Vd
Description
Hewlett-Packardâs INA-54063 is a
Silicon monolithic amplifier that
offers excellent gain and power
output for applications to
3.0⣠GHz. Packaged in an ultra-
miniature SOT-363 package, it
requires half the board space of a
SOT-143 package.
With its wide bandwidth and high
linearity, the INA-54063 is an
excellent candidate for DBS IF
applications. It also features a
unique gain curve which in-
creases over the range from 1 to
2⣠GHz. This gain slope compen-
sates for the gain rolloff found in
typical receiver systems.
The INA-54063 is fabricated using
HPâs 30 GHz fMAX ISOSATâ¢
Silicon bipolar process which
uses nitride self-alignment
submicrometer lithography,
trench isolation, ion implantation,
gold metalization, and polyimide
intermetal dielectric and scratch
protection to achieve superior
performance, uniformity, and
reliability.
GROUND
6-163
5965-5364E
|
▷ |