INA-03184 Datasheet, PDF (1/4 Pages) Agilent(Hewlett-Packard) – Low Noise, Cascadable Silicon Bipolar MMIC Amplifier

Low Noise, Cascadable
Silicon Bipolar MMIC Amplifier
Technical Data
INA-03184
Features
• Cascadable 50 Ω Gain Block
• Low Noise Figure:
2.6 dB Typical at 1.5 GHz
• High Gain:
25 dB Typical at 1.5 GHz
• 3 dB Bandwidth:
DC to 2.5 GHz
• Unconditionally Stable
(k>1)
• Low Power Dissipation:
10 mA Bias
• Low Cost Plastic Package
Description
The INA-03184 is a low-noise
silicon bipolar Monolithic Micro-
wave Integrated Circuit (MMIC)
feedback amplifier housed in a
low cost surface mount plastic
package. It is designed for narrow
or wide bandwidth commercial
and industrial applications that
require high gain and low noise IF
or RF amplification with minimum
power consumption.
84 Plastic Package
The INA series of MMICs is
fabricated using HP’s 10 GHz fT,
25␣ GHz f MAX, ISOSAT™-I silicon
bipolar process which uses nitride
self-alignment, submicrometer
lithography, trench isolation, ion
implantation, gold metallization
and polyimide intermetal dielec-
tric and scratch protection to
achieve excellent performance,
uniformity and reliability.
Typical Biasing Configuration
C _bypass1 (Optional)
V_CC
RFC (Optional)
RF IN
C_block
4
3
1
2
R_bias
C_block
V_d = 4.0 V
(Nominal)
RF OUT
Note:
1. VSWR can be improved by bypassing
a 100–120 Ω bias resistor directly to
ground. See AN-S012: Low Noise
Amplifiers.
5965-9678E
6-108